Provide proper cord support and full contact with the sheaves-groove for uniform wear, and increased belt life The Flex-Bonded Cords are strongly bonded to body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration Longer cover life, providing extended protection to the core of the belt from oil, dirt and heat.
Expanded temperature range resists heat and
cracking Increase flexibility ideal for small diameter
sheaves Reduced bending stress improves
efficiency
Flex bonded tensile cords reduce the need to
retension Precision-machined sidewalls reduce vibration and
wear
Top of the range narrow V-belt for heavy-duty
industrial
drives. Improved resistance to outside bends allows the
use of
back idlers. The new optimizes notch profile makes the
belt runs
smoothly in the pulley groove. Extended temperature
range: from -40oC up to +110oC
Specifically designed for aggressive applications,
this extra heavy-duty belt construction provides
extraordinary high impact strength, capacity and wear
resistance. Aramid Tensile Cords combine limited stretch
with
extraordinary strength and durability. Bareback Cover
resists debris and allows the belt to slip under extreme shock
load conditions, reducing heat
buildup and prolonging belt life.
Concave Sidewalls provide more wedging
effect. Textile cover protects against
abrasion. Resistant to oil, heat, ozone, sunlight, weather and
ageing.
Static conductive. Polyester tensile member withstands
recurrent shock loads.
Good resistance to temperature variations between -40°C
to +80°C.
V80® feature provides matched sets
advantages.
Proper cord support and full contact with the
sheave-groove for uniform loading, uniform wear and increased
belt Flex-Bonded Cords are strongly bonded to the body of
the belt resulting in equal load distribution and the
absorption
of bending stress without cord deterioration. The
Flex-Weave® Cover is a patented fabric construction for longer
cover life, providing extended protection to the belt core
from oil, dirt and heat.
Are made with Gates exclusive EPDM construction for
higher heat resistance, and smoother running and longer
service life. Have specially designed Cords strongly bonded to
the body of the belt resulting in equal load distribution and
the
absorption of bending stress without cord
deterioration.
Fiber Reinforced Ribs for excellent wear resistance. High Modulus, low stretch tensile member for added strength and dependability. Smooth Running for minimal vibration at high speeds.
Banded or bandless construction featuring
high-modules, fiber-loaded stock that offers transverse
rigidity and flexibility at the same time. This results in
higher load carrying capacity and long belt life. Notch
Design reduces thermal and bending stresses for longer life.
Smooth Running construction for minimal
vibration at high speed.
Feature superior length stability for minimal take-up requirements. Suitable for all industrial light duty applications, usually fractional horsepower (FHP) motors.
Bareback construction for smooth clutching on shock loaded,
backside-idler deiven equipment. Aramid Tensile Cords combine
limited stretch with extraordinary strength and
durability.
Suitable for outdoor power equipment, appliances
and industrial applications where FHP belts are typically
used.
Polyurethane compound resists fatigue, wear, ozone and most environmental conditions. More smoother and low vibration. Ribbed backing provides greater lateral stability and relieves bending stress. Unique 60° angle polyurethane construction transmits greater loads at higher speeds in less space.
Joined Band belt construction provides increased belt stability, preventing belts from turning over or from coming off of the drive. Ribbed backing provides greater lateral stability and relieves bending stress.
Patented use of Carbon Fiber as the tensile cord in this
new belt. Especially suited to replace roller chain
drives.• Quieter than roller chain drives
Equivalent capacity to roller chain drives in the same
width.
The trapezoidal tooth profile makes this belt well suited for use in positioning applications. Fiberglass tensile cord provides high strength, excellent flex life, and high resistance to elongation. Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives.
Larger & more robust tooth profile for increased
capacity, as compared to timing belts. Nylon tooth facing
provides a durable wear surface for long service life.
Fiberglass tensile cord provides high strength, excellent flex
life, and high
resistance to elongation.
High horsepower and torque-carrying capacity. Low
noise and vibration with narrower drive designs Accurate
registration No maintenance or equipment
downtime Long life, excellent abrasion resistance and
energy efficiency.
Upgraded Fiberglass tensile cord provides high strength, excellent flex life, and high resistance to elongation. Neoprene body provides protection against grime, grease, oil and moisture. Nylon tooth facing provides a durable wear surface for long service life. 30% increase in horsepower ratings, as compared to previous generation belts. Standard static conductive to ISO 9563
Nylon fabric on both tooth surfaces providing equal load
carrying capabilities on either side of belt. Fiberglass
tensile cord provides high strength, excellent flex life, and
high resistance to elongation. Precision-Formed
elastomeric teeth
and body.
Fibreglass or steel cord for rubber construction. Steel cord for polyurethane SynchroPower construction. Aramid cord for Poly Chain GT construction.
Allows greater slitting flexibility andreduced trim waste. High abrasion resistance. Exceptional surface finishes from improved mold manufacturing and handling techniques. UV stable urethane maintains consistent color over time.
A company incorporated by two young and
dynamic visionary partners with aim to provide complete industrial
supply solution under a single umbrella.
Started the company in 2003 with a very small investment, our main capital was Hard Work, Honesty, Politeness, and Promptness, because of which over these years we have earned reputation and secured our name in the corporate world......
C/o. Laxmisagar Engineers
622/2, Nr. Saint Gobain, Behind NTB Hi-Tech,
Kuruli, Chakan, Pune - 410501
Maharashtra (INDIA)
Phone: +91 20 65291611.
Mobile: +91 98 903 40045 / +91 98 909 61752
Email: info@rbcorp.in
Copyright R B Traders | Powered by
PROLIFIC WORLD
